K-8KMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Safety precautions regarding QV HYBRID TYPE1This product uses a low-power invisible laser (780 nm) for measurement. The laser is a CLASS 1 EN/IEC 60825-1 device. A warning and explanation label, as shown above, is attached to the product as appropriate.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).An inspection certicate is supplied as standard. Refer to page U-9 for details.An online system to monitor the operational and mechanical statuses of measuring machines. This allows you to grasp the state of a process flow from the operational status of measuring machines within a production process. Model No.ItemsQVH4 APEX 302 ProQVH4 APEX 404 ProQVH4 APEX 606 ProQVH4 HYPER 302 ProQVH4 HYPER 404 ProQVH4 HYPER 606 ProMeasuring range (X×Y×Z)Vision300×200×200 mm400×400×250 mm600×650×250 mm300×200×200 mm400×400×250 mm600×650×250 mmNon-contact displacement sensor176×200×200 mm276×400×250 mm476×650×250 mm176×200×200 mm276×400×250 mm476×650×250 mmVision measuring accuracy*1EUX/EUY, MPE(1.5 + 3L/1000) µm(0.8 + 2L/1000) µmEUXY, MPE(2.0 + 4L/1000) µm(1.4 + 3L/1000) µmEUZ, MPE(1.5 + 4L/1000) µm(1.5 + 2L/1000) µmDisplacement sensor measuring accuracy*1*2E1Z(1.5 + 4L/1000) µm(1.5 + 2L/1000) µm*1 L=length between two arbitrary points (mm) *2 Inspected to a Mitutoyo standard. Model No.ItemsQVH1 Apex 302QVH1 Apex 404QVH1 Apex 606Hyper QVH1 302Hyper QVH1 404Hyper QVH1 606Measuring range (X×Y×Z)Vision300×200×200 mm400×400×250 mm600×650×250 mm300×200×200 mm400×400×250 mm600×650×250 mmNon-contact displacement sensor176×200×200 mm276×400×250 mm476×650×250 mm176×200×200 mm276×400×250 mm476×650×250 mmVision measuring accuracy*E1X, E1Y（1.5 + 3L/1000）µm（0.8 + 2L/1000）µmE1Z（1.5 + 4L/1000）µm（1.5 + 2L/1000）µmE2XY（2.0 + 4L/1000）µm（1.4 + 3L/1000）µmDisplacement sensor measuring accuracy*E1Z（1.5 + 4L/1000）µm（1.5 + 2L/1000）µm* Inspected to a Mitutoyo standard. L=length between two arbitrary points (mm)QVH4 ProCNC Vision Measuring System equipped with Non-contact displacement sensorQV HYBRID TYPE1CNC Vision Measuring System equipped with Non-contact displacement sensor• This dual system with a non-contact displacement sensor has a scanning function that enables measurement of minute height differences and 3D shapes.• The non-contact displacement sensor (CPS probe) uses the wavelength confocal method.• This dual system with a non-contact displacement sensor has a scanning function that enables measurement of minute height differences and 3D shapes.• The LED used as the light source of the displacement sensor has an auto-brightness control function that enables seamless measurement of materials with different reectivity.• The double-pinhole technique is used as the detection method of the displacement sensor. It is less directional compared with the knife-edge and triangulation techniques.• The small laser spot with diameter of about 2 μm makes it possible to measure minute shapes.COMMON SPECIFICATIONSCOMMON SPECIFICATIONSExample of 3D form comparison•The focusing point method minimizes the difference in the measuring face reectance and achieves high measurement reproducibility.• Capable of measuring detailed shapes in high resolution. Features: QV HYBRID TYPE1• Enables detection of high inclination angles for both mirror and diffused surfaces.• The automatic lighting adjustment function allows for high accuracy measurements. • Surface roughness or thickness measurement of thin and transparent objects such as lm.Features: QV HYBRID TYPE4 ProQVH4 HYPER 606 Pro
元のページ ../index.html#519