MEASURING INSTRUMENTS CATALOG No.E2021
531/604

L-4LMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Nosepiece for at surfaces12AAA217Nosepiece for cylindrical surfaces12AAA218ø9 2.416.4Stylus64.83.51.559.56160°1.460.112.60.90.6StylusR40ø2.40.41.8ø9 ø9 3.5ø3.8 4.51.216.260.7Stylusø9 1.8 0.4 ø2.41.60.812.860.3Stylusø9 1013.64.81.523.516.461Stylus9Support feet set12AAA216Detector sideOptional Accessories for Surftest SJ-210/310• Deep groove detectors• Gear-tooth surface detectorsUnit: mm12AAA217•Standard accessory for the standard/retractable drive unit of the SJ-310 Series•Not available for the transverse tracing drive unit• Nosepiece for flat surfaces• Extension cable (1 m) (Note: Only one rod can be used.)12BAA303• For the connection between the calculation display unit and drive unit• Support feet set12AAA216• Standard accessory for the standard/retractable drive unit of the SJ-310 Series• Not available for the transverse tracing drive unit• Adjustment range is 28 mm from bottom face.• Height gage adapterNote: Suiable for a height gage holder designed for 9×9 mm section scribers.12AAA222• Nosepiece for cylindrical surfaces12AAA218•Standard accessory for the standard/retractable drive unit of the SJ-310 Series•Not available for the transverse tracing drive unitMagnetic stand adapter12AAA221Height gage adapter12AAA222• Point-contact adapter12AAE643• Transverse tracing type standard accessory.• Dedicated to the transverse tracing drive unit.DetectorOptional Accessories for Drive Units 72 mm7.7 mm• V-type adapter12AAE644• Transverse tracing type standard accessory.• Dedicated to the transverse tracing drive unit.• Adapter for flat surface12AAA219• Not available for the transverse tracing drive unitAdapter for at surface12AAA219Extension rod 50 mm 12AAA21012AAA210• Not available for the transverse tracing drive unit• Extension rod (50 mm) (Note: Only one rod can be used.)• Standard detectors• Small hole detectors• Extra small hole detectors• Magnetic stand adapter12AAA221Mounting spigot diameter is 8 mm.12AAA220Mounting spigot diameter is 9.5 mm.Order No.Measuring forceStylus profiles*Remarks178-2960.75 mN2 µmR/60˚Dedicated to the standard/retractable drive unit178-3904 mN5 µmR/90˚178-3870.75 mN2 µmR/60˚Dedicated to the transverse tracing drive unit178-3864 mN5 µmR/90˚178-3914 mN10 µmR/90˚Dedicated to the standard/retractable drive unit*Tip radius/Tip anglesOrder No.Measuring forceStylus profiles*Remarks178-3830.75 mN2 µmR/60˚Minimum measurable hole diameter: ø4.5mm178-3924 mN5 µmR/90˚*Tip radius/Tip anglesOrder No.Measuring forceStylus profiles*Remarks178-3850.75 mN2 µmR/60˚Not available for the transverse tracing drive unit178-3944 mN5 µmR/90˚*Tip radius/Tip anglesOrder No.Measuring forceStylus profiles*178-3880.75 mN2 µmR/60˚178-3984 mN5 µmR/60˚*Tip radius/Tip anglesOrder No.Measuring forceStylus profiles*Remarks178-3840.75 mN2 µmR/60˚Minimum measurable hole diameter: ø2.8mm178-3934 mN5 µmR/90˚*Tip radius/Tip angles• Not applicable to upward measurement.

元のページ  ../index.html#531

このブックを見る