L-12Mitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.L• CS-3300 Series are highly functional and user-friendly surface texture measuring systems with innovative design features. They enable simultaneous measurement of both surface roughness and contour without changing the detector.• Large sized base models and high-column models are newly added to the line-up.• Equipped with a wide range and high resolution Z1-axis detector.• CS-3300 Series comes with the inclined drive unit as standard, making approach to the target surface and measurement of large workpieces much easier.• Equipped with an operability focused, new style remote box. The new part program key strongly supports manual part-programming.• High throughput is achieved thanks to high drive speed (X axis: Max. 80 mm/s, Z2 axis: Max. 30 mm/s).• All connecting cables are contained within the measuring instrument to eliminate any inconvenience during measurement.• The Z1-axis detector is equipped with a built-in anti-collision safety device.SPECIFICATIONSModel No.CS-3300S4CS-3300H4CS-3300W4CS-3300L4CS-3300S8CS-3300H8CS-3300W8CS-3300L8Measuring rangeX axis100 mm200 mmZ1 axis 5 mm (±2.5 mm in horizontal situation)Straightness (when the X axis is horizontal)0.2 µm/100 mm0.6 µm/200 mmAccuracy (20 °C)X axis±(0.8+0.01L) µm L = Measurement Length (mm)(0.8+0.015L) µm L = Measurement Length (mm)Z1 axis (detector unit)±(1.5+|2H|/100) µm H = Measurement height from the horizontal position (mm)Detector (Z1 axis)Detection methodDifferential inductanceMeasuring force0.75 mNStylus tipStandardTip radius 2 μm, Tip angle 60°, Diamond (surface roughness/contour)ConeTip radius 25 μm, Tip angle 30°, Sapphire (contour)Stylus up/downAvailable (stoppable at mid-stroke if required)X-axis inclination angle±45°Z2-axis (column) travel range300 mm500 mm700 mm300 mm500 mm700 mmBase size (W×D)600×450 mm1000×450 mm600×450 mm1000×450 mmBase materialGraniteNote: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.An inspection certicate is supplied as standard. Refer to page U-9 for details.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).Form MeasurementContour and Surface Roughness Measuring SystemFORMTRACER CS-3300 SeriesCatalog No. E15029CS-3300_E.indd 12020/06/02 20:03Refer to the FORMTRACER CS-3300 Series Brochure (E15029) for more details.Inclinable drive unitDetector sliding mechanismConnecting cables are contained within the measuring instrument.CS-3300H8CS-3300H8(With monitor arm)CS-3300 SeriesSERIES 525 — Surface Texture Measuring Instruments
元のページ ../index.html#539