MEASURING INSTRUMENTS CATALOG No.E2021
550/604

L-23LRoundtestTo realize efcient centering and leveling combined with high-precision measurement Mitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Roundtest RA-H5200SERIES 211 — Roundness/Cylindricity Measuring SystemRoundtest Extreme RA-2200 CNCSERIES 211 — CNC Roundness/Cylindricity Measuring SystemA high-performance automatic system equipped with a high-speed automatic centering/leveling function achieves the world's highest-level of accuracy.•High-speed automatic centering/leveling function contributes to a signicant reduction in the man-hours required for setups.•A fully automatic system which performs processing automatically from part program calling, centering/leveling, measurement, calculation, all the way through to printing.•Capable of continuous inside/outside diameter measurement without changing the detector orientation (up to 50 mm ID).•The automatic positioning function of the turntable enables automatic measurement in combination with table rotation and slider/column movement.•Advanced graphical analysis such as a power spectrum chart is available.•A sliding mechanism is incorporated in the detector holder. •Highly accurate and easy-to-use turntable.The turntable with automatic centering and leveling function is equipped as standard, which frees operators from manual centering and leveling operations.•A function to change the detector posture enables CNC automatic measurement.Automatic control of holder arm posture (vertical/horizontal) and the rotation feature of the detector (rotates in 1° increments in the range of 0 to 270°) enables continuous measurement of various feature combinations, such as OD/ID and/or top/bottom plane measurements. •A positioning sensor to achieve CNC high-accuracy automatic measurement.A Mitutoyo linear scale is used in the X-axis drive unit to directly detect the position of the drive unit. It guarantees the highly precise positioning vital for automatic measurement.•A roughness detector (optional) is supported.Centering and leveling iscomplete within 1 minTilting: 520 µm150 mmEccentricity: 200 µmRefer to the Roundtest RA-2200 Series Brochure (E15001) for more details.SPECIFICATIONSModel No.RA-2200 CNCTurntableRotational accuracy(JIS B 7451-1997)Radial direction(0.02 + 3.5H/10000) µm H: Probing height (mm)Axial direction(0.02 + 3.5X/10000) µm X: Distance from the center of rotation (mm)Maximum loading mass30 kgMaximum probing diameter ø256 mmVertical movement(Z-axis column unit)Vertical travel300 mm500 mmX axisTravel range175 mmDetectorMeasuring rangeStandard±400 µm/±40 µm/±4 µmTracking±5 mmSPECIFICATIONSModel No.RA-H5200ASRA-H5200AHTurntableRotational accuracy(JIS B 7451-1997)Radial direction(0.02 + 3.5H/10000) µm H: Probing height (mm)Axial direction(0.02 + 3.5X/10000) µm X: Distance from the center of rotation (mm)Maximum loading mass80 kg (On auto-centering: 65 kg)Maximum probing diameter ø400 mmVertical movement(Z-axis column unit)Vertical travel350 mm550 mmX axisTravel range225 mm (-25 mm to +200 mm from the rotation center)DetectorMeasuring rangeStandard±400 µm/±40 µm/±4 µmTracking±5 mmAn inspection certicate is supplied as standard. Refer to page U-9 for details.RA-H5200AHwith side tableRA-2200CNCSystem vibration isolator (with side table)Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).

元のページ  ../index.html#550

このブックを見る