L-24LMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.Roundtest Extreme RA-H5200 CNCSERIES 211 — CNC Roundness/Cylindricity Measuring SystemTop productivity and performance from a CNC machine with highest-level accuracy.•The turntable with automatic centering and leveling function is equipped as standard, which frees operators from manual centering and leveling operations.•Automatic control of holder arm posture (vertical/horizontal) and the rotation feature of the detector (rotates in 1° increments in the range of 0 to 270°) enables continuous measurement of various feature combinations, such as OD/ID and/or top/ bottom plane measurements.•A Mitutoyo linear scale is used in the X-axis drive unit to directly detect the position of the drive unit. It guarantees the highly precise positioning vital for automatic measurement.•A roughness detector (optional) is supported.The best accuracy achieved in the class of large cylindricity measuring machine.•Loading capacity is 350 kg, and the highest rotational accuracy in the class is achieved. Besides roundness and cylindricity, the atness can be measured in high accuracy. The workpiece that requires high accuracy measurement such as large and heavy cylindrical parts can be measurement. •For the ID measurement of a deep hole, such as a main shaft of machine tool, a deep hole measuring unit (specially made, without CNC functions) is available. •A Mitutoyo linear scale is used in the X-axis drive unit to directly detect the position of the drive unit. It guarantees the highly precise positioning vital for automatic measurement.An inspection certicate is supplied as standard. Refer to page U-9 for details.Roundtest Extreme RA-6000 CNCSERIES 211 — CNC Roundness/Cylindricity Measuring SystemRA-H5200CNCwith side tableRA-6000CNCRefer to the Roundtest RA-H5200 SeriesBrochure (E4392) for more details.SPECIFICATIONSModel No.RA-H5200 CNCZ-axis column unitStandard column specification(Vertical travel: 350 mm)High column specification(Vertical travel: 550 mm)TurntableRotational accuracy(JIS B 7451-1997)Radial direction(0.02 + 3.5H/10000) µm H: Probing height (mm)Axial direction(0.02 + 3.5X/10000) µm X: Distance from the center of rotation (mm)Maximum loading mass80 kg (On auto-centering: 65 kg)Maximum probing diameter ø356 mmVertical movement(Z-axis column unit)Vertical travel350 mm550 mmX axisTravel range225 mmDetectorMeasuring rangeStandard±400 µm/±40 µm/±4 µmTracking±5 mmSPECIFICATIONSModel No.RA-6000 CNCTurntableRotational accuracy*1*2(JIS B 7451-1997)Radial direction(0.05 + 6H/10000) µm H: Probing height (mm)Axial direction(0.05 + 6X/10000) µm X: Distance from the center of rotation (mm)Maximum loading mass350 kgMaximum probing diameter ø880 mmVertical movement(Z-axis column unit)Vertical travel1050 mmX axisTravel range465 mmDetectorMeasuring rangeStandard±400 µm/±40 µm/±4 µmTracking±5 mm*1 The temperature at which the accuracy can be guaranteed is 20 °C.*2 The rotational accuracy has been obtained when load is applied to the rotation center.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).
元のページ ../index.html#551