L-25LRoundtestTo realize efcient centering and leveling combined with high-precision measurement Mitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.An inspection certicate is supplied as standard. Refer to page U-9 for details.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).• ROUNDTRACER EXTREME models are triple-role CNC prole measuring systems that integrate the roundness and cylindricity measuring capabilities of our ROUNDTEST models and the contour and surface roughness measuring capabilities of our hybrid, dual-role FORMTRACER models to measure surface roughness, contour, roundness, and cylindricity.• Measurement repeatability is improved as a result of the newly developed centring mechanism and optimized slider structure.• A detector holder with motorized sliding function enables continuous inside and upper surface measurement of thick workpieces.• Measurement throughput is improved as a result of the increased drive speeds of each axis and the addition of new functions and technologies.• The incredibly high throughput is the result of reduced positioning time by CNC control, a highly rigid centring table, reduced waiting time until measurement start, and best-in class drive speeds.SPECIFICATIONSModel No.RTX-0605-ATurntableRotational accuracy(JIS B 7451:1997)Radial direction(0.02 + 3.5H/10000) µm H: Probing height (mm)Axial direction(0.02 + 3.5R/10000) µm R: Measuring radius (mm)Maximum loading mass60 kgMaximum probing diameterø680 mmVertical movement(Z-axis column unit) Travel range550 mmX axisTravel range197 mm (-33 mm to 164 mm from the rotation center)*DetectorsMeasuring range±400 µm/±40 µm/±3.6 µm* Value when the measuring system is mounted with a roundness detector and a standard stylus, and is in the outside diameter measuring position with the stylus at 0°.Refer to the ROUNDTRACER EXTREME Brochure (E15032) for more details.ROUNDTRACER EXTREME SERIES 211 — CNC Roundness/ Cylindricity Measuring SystemForm MeasurementCNC Roundness/Cylindricity Measuring SystemROUNDTRACER EXTREMECatalog No. E15032E15032_RTX.indd 12020/12/16 16:42
元のページ ../index.html#552