N-3Coordinate Measuring MachinesPrecision measuring technology in three dimensionsMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.NShop-oor Type CNC Coordinate Measuring MachineMiSTAR 555•An accuracy-guaranteed temperature range of 10 to 40 °C is possible thanks to a combination of technologies, such as the symmetric guide structure, uniform material and temperature compensation.•A contamination resistance more than 2 times better than Mitutoyo's conventional machine is achieved by adopting a newly developed environment-resistant absolute scale*. * Absolute scale that provides an absolute XYZ-values relative to an internal reference point for each coordinate captured. This eliminates the need for an initialization operation.•The footprint is reduced to about 80% compared with that of the conventional moving bridge model by adopting the horizontal-arm structure and installing the CMM controller and PC under the measuring table.ModelItemsMiSTAR 555Measuring rangeX axis570 mmY axis500 mmZ axis500 mmMaximum permissible length measurement error*1*2 ISO 10360-2: 2009 (18 to 22 °C)2.2 + 3L/1000 μmDrive speed5 to 350 mm/s (max. combined speed 606 mm/s) in CNC MODEDrive acceleration1556 mm/s2 (max. combined acceleration 2695 mm/s2)WorkpieceMax. height660 mmMax. loading 120 kgAccuracy guaranteed temperature range10 to 40 °CMass (including the controller and installation platform)655 kg*1 Specifications vary by configuration, size, and thermal environment.*2 L = Measuring length (unit: mm)Note1: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.Note2: For information about guaranteed accuracy outside of the 18 to 22 ºC temperature range, contact your local Mitutoyo sales office.SPECIFICATIONSMiSTAR 555Coordinate Measuring MachinesCatalog No. E16028Shop-floor TypeCNC Coordinate Measuring MachineMiSTAR 555MiSTAR555_E.indd 12020/06/10 11:19Equipped with the PH10MQ probe headProducts equipped with the measurement data output function can be connected to the measurement data network system MeasurLink® (refer to page A-25 for details).Refer to the MiSTAR 555 Brochure (E16028) for more details.An online system to monitor the operational and mechanical statuses of measuring machines. This allows you to grasp the state of a process flow from the operational status of measuring machines within a production process.

元のページ  ../index.html#570