- Home
- Product Information[Vision Measuring System:CNC Vision Measuring System]
| CNC Vision Measuring System |
   |
Middle and compact type CNC Vision Measuring System
QV Active
- Interchangeable objective lens zoom unit
- High-definition color camera
- Touch probe equipped models are also available
Bestselling CNC Vision Measuring System
QV APEX Pro/QV HYPER Pro
- All the QV Pro models are equipped with a strobe light‚ and the newly developed vision measuring function "StrobeSnap" delivers measurements with both high throughput and high accuracy.
- Measuring range (X×Y×Z): 300×200×200 mm to 600×650×250 mm
Vision Measuring Machine with Micro-Form Scanning Probe
MiSCAN Vision System
- Styli as small as a 0.125 mm-diameter are available for scanning measurement of fine-detailed features.
- Deep grooves and deep holes can be measured at the maximum aspect ratio of 17:1
CNC Vision Measuring System
QV Pro
- The STREAM function provides an amazingly high throughput‚ due to the non-stop measurement. Reduces measurement time by about 40% compared with conventional models.
- A rich lineup with a wide array of measurement accuracies‚ ranges and functions.
CNC Vision Measuring System with Touch Trigger Probe
QV TP Pro Series
- Non-contact measurement and contact measurement can be done solely by one unit.
- Enables 3D measurement of workpieces such as press-molded products‚ plastic-molded products‚ and cut products‚
- plastic-molded products‚and cut products‚which until now could not be measured with image processing alone.
CNC Vision Measuring System with Non-Contact Displacement Sensor
QVH4 Pro
- This dual system with a non-contact displacement sensor has a scanning function that enables measurement of minute height differences and 3D shapes.
- The non-contact displacement sensor (CPS probe) uses the wavelength confocal method.
CNC Vision Measuring System with Non-Contact Displacement Sensor
QVH1 Pro
- This dual system with a non-contact displacement sensor has a scanning function that enables measurement of minute height differences and 3D shapes.
- The double-pinhole technique is used as the detection method of the displacement sensor.
Micro Form Measuring System
UMAP Vision System
- Supporting non-contact and contact hybrid
- Tip sphere of diameter 15/30/70/100/300 (um) are provided
High accuracy CNC Vision Measuring System
ULTRA QV
- Flagship machine supports request on high accuracy
- High level Vision Measuring System with unparalleled high rigidity body
- Equipped with Guide method of hydrostatic air bearing
Large CNC Vision Measuring System
QV ACCEL
- Large Vision Measuring System with the measuring range of 800mm to 1500mm or more
- Moving-bridge type supports easy to fix the workpiece
- Optimal for light thin and short life cycle workpiece
Non-Contact 3D Measuring System
QVWLI Pro
- Non contact measurement of both coordinate and 3D form measurement are achieved
- Advanced high accuracy dual head measuring system with white light interferometer optiocal head
- Supports measurement of many detailed dimensions by excellent 3D analysis software
