F-12FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.ABSOLUTE Digimatic Indicator ID-CSERIES 543 — Peak-Value Hold TypeDigimatic IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.SPECIFICATIONSMetricOrder No. (w/lug, at-back)Range (mm)Resolution (mm)Accuracy*3 (mm)Power supplyBattery life (normal use)*5Net weight (g)Overall*4HysteresisRepeatability543-30012.70.001/0.010.0030.0020.002CR2032 × 1 pc.Approx. 1 year180543-300B170Inch/MetricOrder No.(w/lug, at-back)RangeResolution Accuracy*3Power supplyBattery life (normal use)*5Net weight (g)Overall*4HysteresisRepeatability543-3010.5 in/12.7 mm0.00005/0.0001/0.0005 in/0.001/0.01 mm±0.00010 in /0.003 mm0.00010 in/0.002 mm0.00010 in/0.002 mmCR2032 × 1 pc.Approx. 1 year180543-301B170543-302195543-302B170*3 Quantizing error of ±1 count is excluded. *4 Overall magnication and linearity. *5 Applies only if not connected to a data processor. Battery life depends on use of the indicator. Use the above value as a guide only.Note: Products with an Order No. sufxed “B” have a at back.543-300/543-300B• Run-out/MAX-MIN Hold function enables GO/±NG judgment*1 for peak or difference values.• Simple selection of many functions with ve buttons and status icons. • Wide LCD and new analog bar graph are now standard on all models.• Sampling is performed fty times per second for accurate detection of maximum and minimum values.• The ABS (absolute) scale restores the last origin position*2 automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors.Functions• Peak value hold (maximum and minimum value)• Runout value Hold (difference between maximum/minimum values) Note: Peak detection 1) Sampling rate: 50 readings/sec 2) Capturing speed: 50 µm/sec (max)• Zeroset (INC system)• Preset function (ABS system)• Counting direction switching• Tolerance judgment (P1, P2, P3, and INC can be stored)• Resolution selection• Simple calculation f(x)=Ax• Analog bar resolution selection• Key lock• in/mm conversion (inch/mm models)• Display hold (when external device is connected)• Data output• External PC setting input• Display rotation (330°)• Low battery voltage alarm display• Error alarm displayOptional Accessories• Lifting Lifting lever 21EZA198 (ISO/JIS/DIN Type), 21EZA199 (ASME/ANSI/AGD Type) Lifting cable 540774 Lifting knob 21EZA105 (ISO/JIS/DIN Type), 21EZA150 (ASME/ANSI/AGD Type)• SPC Cable: 905338 (1 m) 905409 (2 m)• USB Input Tool Direct (2 m) : 06AFM380F• Input Tool Series IT-016U (USB Keyboard Signal Conversion Type): 264-016-10 IT-007R (RS-232C Communication Conversion Type): 264-007 Refer to page F-66 for details.• Connecting Cables for U-WAVE-T (160 mm): 02AZD790F For foot switch: 02AZE140F Refer to page F-66 for details.• Digimatic Mini-Processor DP-1VA LOGGER: 264-505• Parameter setup kit: 21EZA313Note: Parameter setting software (can be downloaded for free from the Mitutoyo website) is also required.Parameter setup kit• Contact points for Mitutoyo’s dial indicators (Refer to pages F-57 to F-60 for details.)• Interchangeable backs for 2 series (Refer to page F-61 for details.)• Measuring stands. (Refer to pages F-84 to F-92 for details.)An inspection certicate is supplied as standard. Refer to page U-11 for details.Parameter setting softwareProducts equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details). ISO/JIS type ASME/ANSI/AGD type• By using the parameter setup kit (optional) and the dedicated software, the functions and the parameters can be congured using a computer.• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems (refer to page A-3).*1 Tolerance judgment results cannot be output.*2 Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-25.

元のページ  ../index.html#351