F-59FMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.8Flatness: 3 µmø2AUnit: mmLødøD1.7 (2)AUnit: mm( ): For 120042L32ødøDAUnit: mmUnit: mm26.334.7ø3M1.4×0.3Tip of contact pointUnit: mmLRadius (SR)ø5NAL7øDAUnit: mmA: M2.5×0.45A: M2.5×0.45A: M2.5×0.45A: M2.5×0.45A: M2.5×0.45A: M2.5×0.45A: 4-48UNFA: 4-48UNFFlat Point (Carbide) Optimal for use on convex surfaces. Order No.DdL13725576.4101373999810Lever PointSuitable for use* on perpendicular faces, such as those within mold cavities. Lever can be adjusted to the required angle.Order No.900391Order No.900393Needle Point Suitable for probing the bottom of a groove or hole.Order No.NLSR10112111150.413741313170.221AAA25521250.421AAA25631350.4Order No.LSR21AAA0300.6 in0.016 in21AAA0461 in0.016 in21AAA0471 1/2 in0.016 in21AAA0482 in0.016 inNeedle Point (Carbide)Suitable for probing the bottom of a groove or hole.Order No.DL1200660.45321AAA3290.4551200651321AAA3301521AAA3311821AAA33211021AAA33312021AAA33414021AAA3351.5521AAA3361.5101200641.51321AAA3371.52021AAA3381.5401372572821AAA25721821AAA25822821AAA339240Order No.120056Dial IndicatorsComparison measuring instruments which ensure high quality, high accuracy and reliability.Contact PointsOptional Accessory for Digimatic and Dial Indicators and Linear Gages120056120043101121137255137257900391* Perform measurement in the same posture and conditions as for the reference setting so that variation due to lever deflection are reduced. Gently bring the contact point into touch with the workpiece. Use a dial indicator with as small a measuring force as possible.The tip of contact point is interchangeable.Interchangeable contact points (optional)ø1 mm contact point: 102824ø2 mm contact point: 102825ø3 mm contact point: 102826 (provided as standard)Order No.DdL1200415.24.3*1512004276.5*11012004310.59.5*11021AAA3451715*21021AAA3462220*21021AAA3472725*21021AAA3483230*210Flatness: *1: 3 µm, *2: 5 µm

元のページ  ../index.html#398