G-11GLinear GagesIdeal for integration into harsh environments such as automation applicationsMitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.LGDSERIES 575 — ABSOLUTE/Standard TypeConnector378.620Unit: mmOptional Accessories• Air drive unitFor 10 mm range models: 02ADE230For 25 mm range models: 02ADE250For 50 mm range models: 02ADE270Required air pressure: 0.2 to 0.4 MPaSpindle extends when air is supplied.• Rubber boot (spare)For 10 mm range models: 238772For 25 mm range models: 962504For 50 mm range models: 962505• SPC cable extension adapter: 02ADF640• Extension cable for Digimatic gages (0.5 m): 02ADD950• Extension cable for Digimatic gages (1 m): 936937• Extension cable for Digimatic gages (2 m): 965014When connecting an extension cable, an SPC cable extension adapter is required.• Thrust stem set*For 10 mm range models: 02ADB680Thrust stem: 02ADB681 Clamp nut: 02ADB682For 25/50 mm range models: 02ADN370Thrust stem: 02ADN371 Clamp nut: 02ADB692External dimensions are described in the dimensional drawing of the product.• Special spannerFor 10 mm range models: 02ADB683For 25/50 mm range models: 02ADB693* The thrust stem set is a combination of thrust stem and a clamp nut. A special spanner is required for tightening. If using multiple gages, a thrust stem set for each gage and one special spanner are required.Dimensions with a thrust stem installedCable length =2, 3, 5, 7 m(screw top height)02ADB681Thrust stem02ADB682Clamp nutM9.5×0.5Attachment thread for thrust stemM9.5×0.546.961.515.4(129.5)3410.6 or longer (stroke)12.3ø8-0.009 017.320378.669.514.54ø9.5-0.015 0(13.8)12545.975.7146.914.80.6Rubber bootAttachment thread for thrust stemM14×0.5(screw top height)Cable length =2, 3, 5, 7 m26 or longer (stroke)02ADB69202ADN371Clamp nutThrust stemM18×1Dimensions with a thrust stem installed18.595ø18-0.018 0(24.2)2193.68.634(208.3)13.8ø15-0.015 020378.661.730.720.64.584.1200.6114.76.522Rubber bootDimensions with a thrust stem installed(screw top height)Cable length =2, 3, 5, 7 m51.5 or longer (stroke)M14×0.5Attachment thread for thrust stemM18×1Thrust stemClamp nut02ADN37102ADB69218.595ø18-0.018 0(24.2)211423413.8(316)0.6ø15-0.015 037208.661.720.656.18.64.5124.9174629.620Rubber boot•ABSOLUTE electrostatic capacitance type encoder makes it possible to maintain the reference point even when the power is switched off. •Excellent protection against dust and splashing water (IP66) on the factory oor.•The spindle guide uses high-precision linear ball bearings for extremely smooth movement and exceptional durability.•Sliding durability improved to remain serviceable for at least 15 million cycles (in-house testing).•Shock resistance, 100 G/11 ms (IEC 60068-2-27)575-326, 575-326-5575-327, 575-327-5575-328, 575-328-5SPECIFICATIONSMetricOrder No.*1575-326575-326-5575-327575-327-5575-328575-328-5Measuring range10 mm25 mm50 mmResolution10 µmMeasuring accuracy (20 °C)20 µm30 µmQuantizing error±1 countMeasuring force Contact point downwards1.2 N or less4.6 N or less5.7 N or lessContact point horizontal1.1 N or less4.3 N or less5.3 N or lessContact point upwards1.0 N or less4.0 N or less4.9 N or lessPosition detection methodABSOLUTE electrostatic capacitance type linear encoderResponse speedUnlimited (not applicable to scanning measurement)OutputDigimatic codeExternal inputReference-setting signal (Absolute reference position*2 can be changed externally.)Mass*3Approx. 260 gApprox. 300 gApprox. 400 gContact pointø3 mm carbide tipped (fixing screw: M2.5 (P=0.45)×5), standard contact point: 901312Stem ø8 mmø15 mmBearing Linear ball typeOutput cable length (directly extended from the main unit)2 m5 m2 m5 m2 m5 mOperating temperature (humidity) ranges 0 to 40 °C (RH 20 to 80 %, non-condensing)Storage temperature (humidity) ranges–10 to 60 °C (RH 20 to 80 %, non-condensing)*1 The last digit of the Code No. represents a special cable length in meters.*2 The absolute reference point is near the lowest rest point at shipment.*3 Mass including 2 m cable. 575-326, 575-326-5575-327, 575-327-5LGD®-1025L-B, -1025L/5-B575-328, 575-328-5Unit: mmDIMENSIONSWith thrust stem set(optional accessory) With thrust stem set(optional accessory) With thrust stem set(optional accessory) Refer to the Linear Gage Brochure (No. E13007) for more details.

元のページ  ../index.html#446