L-9Mitutoyo reserves the right to change any or all aspects of any product specication, including prices, designs and service content, without notice.An inspection certicate is supplied as standard. Refer to page U-11 for details.Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).• FORMTRACER Avant S3000 series are highly functional and user-friendly surface roughness measuring systems with innovative design features.• Often a special method of workholding, such as a custom jig, is required to measure an inclined workpiece surface but this is not needed if you select from the FORMTRACER Avant S3000 series since some models have an inclining drive unit to handle this situation. This feature makes approaching the target surface and measurement of a large workpiece much easier.• The new style remote box has been developed in pursuit of operational usability. An overdrive knob controls the drive speed in real time and is very convenient when fine positioning is required. Another new feature is a part program key that strongly supports creation of measurement part programs, including a move command for manual operation and a measurement start command.• High throughput is achieved thanks to high drive speed (X axis: Max. 80 mm/s, Z2 axis: Max. 30 mm/s) and acceleration (X axis: 30 mm/s2).• All connecting cables are contained within the measuring instrument to eliminate any inconvenience during measurement.• Since the Z1-axis detector incorporates an anti-collision safety device, the detector unit will automatically stop if it touches a workpiece or fixture.• A variety of detector holders (optional) are available.• A detector for measuring contours can be retrofitted.SPECIFICATIONSModel No.FTA-S4S3000FTA-H4S3000FTA-W4S3000FTA-L4S3000FTA-S8S3000FTA-H8S3000FTA-W8S3000FTA-L8S3000Measuring rangeX axis100 mm200 mmZ1 axis 800 µm, 80 µm, 8 µmStraightness (when the X axis is horizontal)(0.05+0.001L) µm L = Measurement Length (mm)(0.1+0.002L) µm L = Measurement Length (mm)X-axis inclination angle±45° (Only for models with X-axis inclining drive unit)Z2-axis (column) travel range300 mm500 mm700 mm300 mm500 mm700 mmBase size (W × D)60 × 450 mm1000 × 450 mm600 × 450 mm1000 × 450 mmBase materialGraniteNote: While the appearance of the natural stone measuring table varies according to the source, the high stability for which this material is known can always be relied upon.Remote box with user-friendly operabilityDetector holder (optional)Large sized base models and high-column models are added to the line-up.FTA-S4S3000FORMTRACER Avant S3000 SeriesSERIES 178 — Surface Texture Measuring InstrumentsFormtracerHybrid machine with dual-role capabilityConnecting cables are contained within the measuring instrument.Inclined drive unitL

元のページ  ../index.html#540