Gage blocks that can be custom-manufactured and applied products

1.Special gage blocks 1-1. Special dimensions We can manufacture products with the following standard contours (Table 1) of any dimensions. Steel :Within nominal length range of 0.1 to 1000 mm Ceramic :Within nominal length range of 0.5 to 500 mm Low thermal expansion ceramics :Within nominal length range of 30 to 1000 mm Table 1 Standard Contours Nominal Size (mm) Section Dimensions (mm) 10 or under 30 (-0.3 to 0) X 9 (-0.2 to -0.05) Over 10 35 (-0.3 to 0) X 9 (-0.2 to -0.05) Special Dimension Gage Blocks 1-2. Addition of Special Markings We can mark gage blocks with the characters you want, as long as they are alphanumeric characters. 2. Special Gages 2-1. We manufacture gages by shaving standard gage block material. Shape: Items that can be manufactured from standard material (35 X 9 X 100 mm) (however, minimum section of 6 X 6 mm) Material: Standard gage block steel or ceramic. Example: Section shape A x B x thickness T (A6 X B30 X T5 mm, etc.) * Enter your desired specifications on the following "Gage Specifications Form" and submit them to Mitutoyo through your accustomed trading firm. 2-2. Section Shapes Other than 2-1 We manufacture specially shaped gages according to the customer's specifications, starting from procurement of the required material. Material: Steel (hardened steel HRC62 or higher) and ceramic Max. section shape (steel): A140 X B140 mm or diameter of 160 mm or smaller Max. section shape (ceramic): A50 X B50 mm or diameter of 60 mm or smaller * Enter your desired specifications on the following "Gage Specifications Form" and submit them to Mitutoyo through your accustomed trading firm. 3. Other Gages Please consult us about gages of different shapes. Step Gage Cylindrical Block for Depth Gage